For choosing the optimal position of the Base station and Repeaters, these potential interference sources should be considered before installing a Wildix W-AIR system These interferences can come from the same network or from the outside. Interference Sources: other signals can create interferences and weaken the signals of the receiving antennas.The amount of absorption depends on the building and its environment, the amount of solid structure Building Penetration: when a signal strikes on a building it is diffracted or absorbed therefore the signal can be reduced.The following radio related issues should be considered before deploying a W-AIR DECT Network: Alternatively, in the case of an outgoing call, the SIP call will be established from the initial base station, and the RTP stream will be set up between Base 2 and the PBX:
#STEP2 AIR DOC REGISTRATION#
If an incoming call arrives while the handset has moved to another base station (Base 2 in our example) but the new Location Registration was not yet performed, the SIP call will arrive at the initial base station (Base 1 in our example), the RTP stream will be set up between Base 2 and the PBX. Handsets lose contact to the initial base station due to reset/ power off/ heavy DECT trafficĪfter 5 minutes but before 5+2 minutes (+2 minutes occur when service connection traffic is signalled at the same time as location registration should take place in this case the location registration procedure will be delayed) *How the period of time after which Location Registration is performed, is defined: Thus, a handset must stay on the same base station before a new SIP registration is made.
Since the SIP registration is initiated by the completion of the Location Registration, a new SIP registration will also not be done until this procedure has completed on a new base station. Therefore, the handset will not perform a new DECT Location Registration until it has resided on the same base station for a defined period of time*. Roaming does not immediately result in a new SIP registration, to avoid unnecessary signalling. Base station indoor range: 50 m outdoor range: 300mīy roaming it is meant that the handset moves its SIP and DECT registration from one base station to another base station.Up to 30* users registered to 1 base station.LAN PTP Sync or Sync over the air (for sync over the air, refer to W-AIR Network Admin Guide - Sync over the air).
#STEP2 AIR DOC PLUS#
Sync over LAN with W-AIR Base Sync Plus/ W-AIR Base Sync Plus Outdoor: Multicell network s calability and features Follow the online Guides to get detailed information: W-AIR DECT Handsets Guide, W-AIR Headset Guide. Wildix W-AIR handsets: W-AIR Basic, W-AIR 100 (End Of Life), W-AIR LifeSaver, W-AIR Med, W-AIR Office and W-AIR Headset. Repeater - extends the signal coverage of the base station. Documentation: W-AIR Small Business - Admin Guide, W-AIR Small Business R1 OLD - Admin GuideĢ.
0 kommentar(er)
